I ordered an 8ohm mini speaker that I will be using to output my sound, Below is a link to the speaker that i have ordered. The sound I will be creating will correspond to the different states of the desk buddy.
Continue reading “Jose Update – Update 1”
So I have been using this website to aid me along with face detection:
here I am stuck at step 2 because I am not sure if I should connect the pi to a remote desktop and program the pi through the remote tool on another computer. This would make it some what easier to work with but at the same time, this can use up more CPU and memory
Continue reading “Michael Update – Update 1”
RGB LED Strip Driver Design:
I am going to be updating the colors on the RGB LED Strip using Pulse Width Modulation (PWM).
THE RGB LED strip is going to be controlled using three signals (1 controls the Red color, 1 controls the Green color, and 1 controls the Blue color). It is the combination of these three signals that creates the different colors seen on the RGB LED strip.
Continue reading “Victor Update – Update 1”
Servo in Verilog
In order to control the servo, we are going to generate a PWM (pulse width module) signal in every 20 ms. The servo expects to see a pulse every 20 ms.
Continue reading “Skyler Update – Update 1”